34
Lock Setting
To access the Lock System menu, you must enter the password. Enter the default password “0000” for first time use. To change
the password, refer to “New Password” (see below).
Lock System
The Lock System is designed to prevent accidental re-tuning of the TV / losing of channels and to prevent children from watching
unsuitable programmes.
The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered
when you access channel block, rated programme and first time setup, also all buttons on the TV will be locked.
1. Press the MENU button to display the main menu. Press the
buttons
to select the Lock System and then press the
button or the OK
button.
Lock System
Enter Password
Off
None
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
Clear Lock
Off
MENU: Return EXIT: ExitMove
– – – –
– – – –
2. Press the buttons to select the Enter Password. Use the 0-9 buttons
to input a 4-digit password to enter the Lock System menu.
Lock System
Enter Password
– – – –
Off
None
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
Clear Lock
Off
– – – –
MENU: Return0~9: Input EXIT: ExitMove
3. Press the buttons to select Enable and then the buttons to select
On / Off.
If the Enable is set to On, a valid password must be entered when you access
Auto Tuning / Manual Tuning / Channel Edit / Favourite Manager / Restore
Factory Default.
4. Press the MENU button to return to the previous menu, press again to return
to the main menu.
5. Press the EXIT button to exit the menu.
Lock System
Enter Password
– – – –
Off
None
Enable
Channel Block
Parental Rating
Lock Keypad
New Password
Clear Lock
Off
– – – –
MENU: Return0~9: Input EXIT: ExitMove
The default password is “0000”.
If you change the password, be sure to remember the new
password! If you forget the new password, enter the master
password“8899”.
To Next Page
Loading...
Need help?
General
