21
Assignments: How to create an assignment on your Gear
1. Identify the command you want to assign, this can be from any of the groups COMMANDS, KEYS, ACTIONS,
MACROS or SYSTEM
2. Click & drag the command name to the desired button/key
Note: Another way to assign a command is to click and highlight the
button/key by clicking the or the text. The button/key will then highlight
blue. Click a command to assign it.
3. The Button/Key. This shows what command is assigned to that feature.
Note: To delete a command, highlight the button/key and drag the command off. Another way is to select it and press
the DELETE key
4. DEFAULT | G-SHIFT. Switch between DEFAULT and G-SHIFT (for supported devices). G-SHIFT is another set of
assignments which are all activated when in that mode. Drag commands onto the button/key the same way as
you would in DEFAULT mode.
5. Command Indicator. This shows which button/key this command is currently assigned to. If its Red this would
signify its assigned in G-SHIFT.
To Next Page
Loading...
General