LS tractor MT468 User Manual

3 -26
(2) Creeper gear lever (if fitted)
 It is used to work with very low driving speed
(creeper speed). When doing general work or
traveling on the road, select the standard speed.
 If pulling this lever upward, the creeper gear is
engaged, and if pushing it downward, the
creeper gear is disengaged.
 Before operating the creeper gear lever, press
down the clutch pedal and brake pedals and
stop the tractor completely.
Creeper gear lever
Creeper range
Standard
(3) Differential lock pedal
 When the rear wheel is slipping and the tractor
can not move forward, stop the tractor and press
down the differential lock pedal.
 The differential lock is effective for working on a
slippery ground.
 If the differential lock is engaged, both rear
wheels will rotate at equal speed. So, It can
disturb the steering operation, and you can not
turn smoothly.
 Take your foot off the pedal to release the
differential lock. If the traction force is reduced to
some extend, the lock is released automatically.
 If the differential lock does not disengaged (i.e.
the turning radius is larger than normal and the
turning is not smooth), depress the clutch pedal
and/or press the left/right one-side brake pedal
slightly for a second each other.
Differential
lock pedal
▶Do not turn the tractor with pressing the differential lock pedal.
▶Do not use this differential lock pedal while driving on public road.
▶Do not engage the differential lock when one wheel is spinning.
Warning
▶As the driving force of the rear axle is very high in creeper speed range, the
machine may not be stopped even if you press the brake pedals. In this case,
depress the clutch pedal together to cut off the engine power.
▶ Only operate the creeper gear lever by hand. If stepping on it , it may cause a
failure.
Caution

LS tractor MT468 Specifications

General

Brand	LS tractor
Model	MT468
Category	Tractor
Language	English