LS tractor MT468 User Manual

3 -22
Clutch pedal
(14) Clutch pedal
 This is used to engage or disengage the main
transmission clutch for starting engine or shifting
transmission gears.
 Depress the clutch pedal quickly and fully, and
release it slowly.
 When depressing the clutch pedal, If the PTO
mode switch is placed on;
- AUTO: the PTO shaft will be stopped.
- MANUAL: the PTO shaft will NOT be stopped.
Throttle pedal
(13) Throttle pedal
 This pedal is used to control the engine speed
when running on the road.
 When using the throttle pedal, the throttle lever
must be placed on the LOW speed position.
 There is a sensitive electronic sensor on the
throttle pedal. Do not remove or modify the
throttle pedal arbitrarily.
 If there is an error related to this sensor while
the engine is running, the engine speed will be
fixed to 1500 rev/min, so called LIMP HOME
mode. Contact your authorized local dealer.
▶ DO NOT ride your foot on the clutch pedal while driving the tractor.
▶ As a start safety switch is installed for operator’s safety, depress the clutch pedal
fully to start the engine.
Caution

LS tractor MT468 Specifications

General

Brand	LS tractor
Model	MT468
Category	Tractor
Language	English