LS tractor MT468 User Manual

5 -56
(5) Tail/brake light bulb and turn signal light bulb- Replace
1
3
2
② Side light/Front turn signal light
bulb replacement - Cabin models
1. Remove the screw① retaining the turn signal
light lens and remove the lens.
2. Push in on the turn signal light bulb② and
rotate counterclockwise in the socket to remove
the old bulb.
3. Insert the new bulb into the socket and turn the
bulb in a clockwise direction until tightened.
4. If the side light bulb③ is damaged, open an
electrode terminal and pull out the bulb, and
replace it with a new one.
5. Install lenses and retaining screw①.
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
① Tail/brake light bulb and rear turn
signal light bulb replacement
1. Remove the two screws① retaining the taillight
lens and remove the lens.
2. Push in on the tail/brake light bulb② or turn
signal light bulb③ and rotate counter-clockwise
in the socket to remove the old bulb.
3. Insert the new bulb into the socket and turn the
bulb in a clockwise direction until tightened.
4. Install lenses and retaining screws①.
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
1
3
2

LS tractor MT468 Specifications

General

Brand	LS tractor
Model	MT468
Category	Tractor
Language	English