LS tractor MT468 User Manual

5 -39
(2) Changing Transmission oil
 Stop tractor on a level surface and apply parking
brake. Run engine for several minutes to warm
oil and lower implements and stop the engine.
 Clean around the oil filling inlet and drain plugs.
 Set a clean container under the drain plugs and
remove them under the transmission and drain
the oil completely.
 Remove metal sludge stuck to the drain plugs
and tighten the drain plugs again with new seals.
 Add new oil until the oil level is between MIN
and MAX marks of the oil gauge.
 For oil specification, see chapter 5-3, “Lubricants
and Capacity” or the last page in this manual.
Drain plugs
<Oil gauge >
Max.
Min.
Oil filling inlet,
Oil gauge
▶ Contaminated oil may reduce durability of the transmission and it can cause a
failure of the hydraulic system. Clean around the oil filling inlet and then pull the oil
gauge.
Caution

LS tractor MT468 Specifications

General

Brand	LS tractor
Model	MT468
Category	Tractor
Language	English