4 -9
Throttle
lever
Brake pedals
Clutch pedal
Shuttle lever
(5) Stopping tractor
1. Depress the clutch and brake pedals. Push
the throttle lever to “Low” speed position.
Place all the transmission gear levers in
neutral position and put PTO switch to “OFF”
position.
3. Apply parking brake, and release the brake
pedals and clutch pedal slowly.
2. Lower the implements to the ground and
turn key switch to “OFF” position.
Main gear
shift lever
Range gear
shift lever
PTO gear lever
Parking brake lever
PARK
Button
Caution
▶ DO NOT leave the tractor while the transmission gear is placed in the neutral
position and the parking brake is not applied. The tractor may roll down.
Apply the parking brake at all times before leaving the tractor.
▶ Remove the ignition key always after stopping engine.
To Next Page
Loading...
Need help?
General
