6 -3
6-3. Every 6 month check
Quick
coupler
(3) Checking Leakage
Check the tightening torque and oil leakage of
the connecting parts.
Oil spots or stains on the connecting parts
indicate the possibility of refrigerant leak. Check
the refrigerant amount.
(2) Cleaning Condenser and
Radiator screen
Stop engine and allow the engine to cool. Open
bonnet.
Unscrew the knobs and pull out the radiator
screen to the left or right-hand side.
Remove dust and dirt, dry grass, and other
debris stuck to the condenser, fuel cooler (if
fitted), TM oil cooler (if fitted), radiator and
radiator screen with soft brush or low
pressurized air or water.
Pay attention that the cooling fins are not
damaged. If necessary, repair the deformed fins.
Depending on the working condition, shorten the
service interval reasonably.
Condenser
(1) Checking refrigerant amount
Check the refrigerant amount periodically. Contact your authorized local dealer for it. The
components of the air conditioning system have to be handled by an authorized service expert.
Refrigerant and capacity: R-134a, 750g (26.5 oz)
Radiator screen
Knobs (Both side)