3 -24
(16) Beacon lamp switch (if fitted)
① Cabin model
It is used to turn on/off the beacon lamp
connected to beacon connectors.
The beacon connectors are installed on the left
and right-hand side under the cabin roof.
ON - press the upper side (symbol part) of the
switch.
OFF - press the lower side of the switch.
Beacon connector
Beacon lamp switch
Cabin
Beacon connector
Roll-bar
Cabin
② Roll-bar model
The beacon connector is installed on the rear work lamp bracket.
To turn on/off the electric device connected to the beacon connector, turn on/off the light switch.
Light switch
Roll-bar