4-2 - POWERHEAD 90-830234R3 DECEMBER 1997
Tools for Powerhead Repair
1. Flywheel Holder 91-52344
2. Protector Cap 91-24161
3. Flywheel Puller 91-73687A1
4. Lifting Eye 91-90455
5. Piston Ring Expander 91-24697
6. Piston Pin Tool 91-74607A1
7. Lockring Installation Tool 91-77109A2/A3
8. Powerhead Stand 91-812549
General Information
DISASSEMBLY AND REASSEMBLY
If complete disassembly is not necessary, start at ap-
propriate spot; start reassembly at point disassembly
stopped.
If major powerhead repairs are being done, remove
powerhead from lower unit. It is not necessary to re-
move powerhead for:
a. Visual check for scoring or broken rings (cyl-
inder walls and pistons), by viewing through
exhaust ports.
b. Minor external repair (i.e. - ignition system,
carburetors, reed blocks, thermostat checks,
etc.).
To Next Page
Loading...
Need help?
General
