VELVET DRIVE IN-LINE TRANSMISSION SERVICE MANUAL NUMBER 23
Page 8A-8 90-861326--1 MARCH 1999
Filling Transmission
IMPORTANT: Use only specified transmission fluid (see “Specifications”).
1. Remove dipstick. Fill transmission with fluid, through dipstick hole, to bring up to full
mark.
72526
a
b
c
a-Dipstick
b-Full Mark
c-Dipstick Tube
IMPORTANT: To accurately check fluid level, run engine at 1500 RPM for 2 minutes
immediately prior to checking level.
2. Start engine and run at 1500 RPM for 2 minutes to fill all hydraulic circuits.
NOTE: Be sure to push dipstick all the way down into dipstick tube when checking fluid level.
3. Stop engine and quickly check fluid level. Add transmission fluid, if necessary, to bring
level up to full mark on dipstick.
4. Reinstall dipstick. Be sure to tighten T-handle securely.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General