Structure and Assembly/Disassembly 7-23
7.3 Preparation
7.3.1 Tools Required
Electrostatic protecting gloves: 1 pair.
—Refer to the parts to be removed (such as screws)
—Refer to the parts to be pulled out (cable port, encoder or lock)
—Refer to the movement orientation.
7.3.2 Engineers Required
Only technical professionals from Mindray or engineers authorized by Mindray after
training can perform maintenance and check.
7.3.3 Preparations for Installation
You should perform the following preparations before the disassembling of ultrasound
equipment.
1. When you stop the scanning and the image capture, you should power off the system
and disconnect the system from the AC power supply, then pull out AC power cables.
2. Prepare the tools and gloves.
7.4 Assembly/Disassembly
Attention: Be careful of the electrostatic discharge when in operation.
To Next Page
Loading...
Need help?
General
