Mindray DC-26 User Manual

Options Installation 8-5
8.3 Printer Adapter
8.3.1 Structure of the Entire System
No.
Name
1.
Printer adapter cover
2.
Printer adapter rear cover
8.3.2 Tools Required
Name
Type
No.
Remarks
Cross-headed
screwdriver
Type-2 screwdriver
/
Assembly and
disassembly of the
M2.5 flat-headed
screws.
8.3.3 Engineers Required
Only technical professionals from Mindray or engineers authorized by Mindray after training can
perform the maintenance and the check.
8.3.4 Requirements
You should perform the following preparations before disassembling the ultrasound device.
1. Power off the printer adapter, disconnect all the AC power, and pull out the auxiliary power
cables.
2. Put the printer adapter in a stable place.
3. Prepare the tools required.

Mindray DC-26 Specifications

General

Brand	Mindray
Model	DC-26
Category	Medical Equipment
Language	English