5-104 Maintenance and inspection interval
5Maintenance and Inspection
5 Maintenance and Inspection
The maintenance and inspection procedures to be carried out to use the robot for a long time without trouble are
described in this chapter. The types and replacement methods of consumable parts are also explained.
5.1 Maintenance and inspection interval
Maintenance and inspection are divided into the inspections carried out daily, and the periodic inspections carry
out at set intervals. Always carry these out to prevent unforeseen trouble, to maintain the product for a long time,
and to secure safety.
(1) Inspection schedule
Fig. 5-1 ： Inspection schedule
0 Hr
Daily inspection
Monthly inspection
Monthly inspection
500 Hr Monthly inspection
Monthly inspection
Monthly inspection
1000 Hr Monthly inspection
Monthly inspection
Monthly inspection
1500 Hr Monthly inspection
Monthly inspection
Monthly inspection
2000 Hr Monthly inspection Yearly inspection
Operating time
<Guideline for inspection period>
For one shift
8 Hr/day x 20 days/month x 12 months = approx. 1800 Hr
10 Hr/day x 20 days/month x 12 months = approx. 2400 Hr
For two shifts
15 Hr/day x 20 days/month x 12 months = approx. 3600 Hr
[Caution] According to the schedule on the above, when using the double shift, you should
make the inspections at half the regular intervals.
To Next Page
Loading...
Need help?
General
