Mitsubishi 00JCPU User Manual

5 - 29
(4) Precautions
(a) Setting the communication time check period in GX Developer
Since writing a file to the standard ROM or Flash card takes time, set "Check at communication time" in GX
Developer to 60 seconds or longer.
If the set time is short, GX Developer may time out.
(b) Writing a file from GX Developer in another station via CC-Link
Since writing a file to the standard ROM or Flash card takes time, make the CPU monitoring time setting
(SW000A) of CC-Link to 60 seconds or longer.
(The default value of 90 seconds can be used.)
Remark
For settings of the communication time check period and CPU monitoring time, refer to the following.
GX Developer Version8 Operating Manual
Figure 5.27 Check at communication time setting
Figure 5.28 Writing a file from GX Developer in another station(via CC-Link)
GX Developer in another station
CPU module that writes files to the
standard ROM or Flash card

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English