Mitsubishi 00JCPU User Manual

10 - 16
(a) When local devices in a subroutine program are enabled
When SM776 (Enable/disable local device at CALL) is turned on, the processing time shown in Table10.18 or
Table10.19 is required for each subroutine call.
"n" in the table indicates the number of local device points (unit: K words).
Table10.18 Processing time (when a local device file in the standard RAM is used)
CPU module
Processing time when a subroutine
program in the same file is called
Processing time when a subroutine
program in a different file is called
Q02CPU
(0.35 n + 0.05 ) 10
3
s (0.70 n + 0.10 ) 10
3
s
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
(0.15 n + 0.03 ) 10
3
s (0.30 n + 0.05 ) 10
3
s
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
Table10.19 Processing time (when a local device file in a SRAM card is used)
CPU module
Processing time when a subroutine
program in the same file is called
Processing time when a subroutine
program in a different file is called
Q02CPU
(1.15 n + 0.30 ) 10
3
s (2.30 n + 0.60 ) 10
3
s
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
(0.85 n + 0.15 ) 10
3
s (1.65 n + 0.30 ) 10
3
s
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU

Mitsubishi 00JCPU Specifications

General

Brand	Mitsubishi
Model	00JCPU
Category	Controller
Language	English