Motorola TETRA MTM5400 User Manual

• Off – Scrolling through the talkgroup list stops after reaching first or last talkgroup in the
current selected folder.
NOTE: Only when Wrap Around is set to
On and the Scroll Range is set to Scroll To
Next, you are able to scroll through all the talkgroups and folders.
4.7.14.5
Setting Rotary Knob Scroll Range
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Rotary Knob→Scroll Range.
3 Select one of the following options:
• Stay In Range – Scrolling through the talkgroups in the current folder only.
• Scroll To Next – Scrolling through all the talkgroups and folders.
NOTE: Only when Wrap Around is set to
On and the Scroll Range is set to Scroll To
Next, you are able to scroll through all the talkgroups and folders.
4.7.14.6
Setting Rotary Knob Talkgroup Selection
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→
Rotary Knob→Confirm TG Sel..
3 Select one of the following options:
• On – You need to confirm the talkgroup selection by pressing Select or pressing the PTT
button to immediately start a call on a new talkgroup.
• Off – Attaches to the selected talkgroup without any additional prompt.
4.7.15
Default Setting
This sub-menu item resets the radio back to default settings.
4.7.15.1
Selecting Default Setting
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Def. Settings.
Your radio display Reset to def. settings?. Press Yes to confirm.
4.8
Group Setup
This menu item allows you to set the operation parameters, scanning and my groups folder.
68015000180-MR
Chapter 4 : Main Menu
106

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz