Motorola TETRA MTM5400 User Manual

5.20.16.1
New WAP Messages
Types of the WAP Messages and their priorities:
NOTE: Your service provider sets the priority of the message.
• Push Message
- High – animation and the icon (blinking) are displayed with the New WAP Message tone and the
browser opens.
-
Medium – animation and the icon are displayed with the New WAP Message tone.
- Low – icon is displayed with the New WAP Message tone.
- Delete – available only if you are in WAP Box, the text WAP Message deleted remotely is
displayed, otherwise there is no indication.
NOTE: Animation is not displayed if you are in a call, or in Emergency Mode, or in Call Out,
or in message editor, or PIN lock state, or switching to DMO.
• Load Push Message
- High – browser opens to the user with the New WAP Message tone.
-
Low – the icon is displayed with the New WAP Message tone.
NOTE: The browser does not open if you are in a call, in Emergency Mode, in Call Out, in
message editor, in PIN lock state, or when switching to DMO.
5.20.16.2
Viewing WAP Messages
Procedure:
1 From the home screen, press the Menu
key.
2 Select
Messages→WAP Box.
3 Select the required message.
4 Select Go to to view the message in the browser.
68015000180-MR
Chapter 5 : Features
146

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz