Motorola TETRA MTM5400 User Manual

4.7.6.2
All Tones
You can activate/deactivate all tones.
4.7.6.2.1
Setting All Tones
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Tones→All Tones.
3 Select one of the following options:
• On – Activates all the tones.
• Off
– Deactivate all the tones.
4.7.6.3
Talk Permit
You can set a different tone upon pressing the PTT button.
4.7.6.3.1
Setting Talk Permit
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Tones→Talk Permit.
3 Select one of the following options:
• No Tone – No tone heard upon pressing the PTT button.
• Short Tone – Short tone heard upon pressing the PTT button.
• Normal Tone – Factory-default tone heard upon pressing the PTT button.
4.7.6.4
Clear to Send
You can activate/deactivate tone for the transmitting radio that the receiving radio is ready to accept
the transmission.
4.7.6.4.1
Setting Clear to Send
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Tones→Clear to send.
3 Select one of the following options:
• Tone On – Activate clear to send tone.
• Tone Off – Deactivates clear to send tone.
68015000180-MR
Chapter 4 :
Main Menu
96

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz