Motorola TETRA MTM5400 User Manual

Table 20: Contact Types
Contact Icon Description
Private
Cannot have a speed dial number.
Mobile
Home
Work
PABX
Other
Pickers
Indicate more than one number in a contact.
# (number)
Each contact entry must contain a number.
Speed #
Shows the default Speed Dial number. You can accept or change it.
Simplex (Private only)
Shows the hook method for simplex calls.
Duplex (Private only)
Shows the hook method for duplex calls.
4.4.1
Creating Contacts
Procedure:
1 From the home screen, press Contacts key.
2 Select [New Contact].
3 Highlight Name and press Change. Enter the name of your contact and press OK.
4 Highlight Type and press Change. Select the required type of your contact.
NOTE:
You can also use the Left and Right Navigation keys to select the type of your contact.
If Private is selected, you can set the hook method for Simplex and Duplex
calls (if the
respective Private Call Hook Customization is enabled).
5 Highlight #
(number) and press Change. Enter the number of your contact and press Ok.
6 If needed, highlight Speed # and press Change. Enter the speed dial number (1–1000) and
press OK.
NOTE: If the entered number exist, the radio displays Overwrite?. Press Yes to
confirm, or No to enter the speed dial number again.
68015000180-MR
Chapter 4 :
Main Menu
83

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz