Motorola TETRA MTM5400 User Manual

4.3.8.2
Sending Predefined Templates
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages
→Predefined.
3 Highlight the required template and do one of the following:
• Select Send
• Press the PTT button
• Press the Send key
You can edit the predefined template before you send it. Press the Menu key and select Edit.
The edit screen opens with the template text. You are only allowed to replace the existing text.
4.3.9
Status Messages
The radio allows you to send two types of status messages: statuses and targeted statuses. Your
service provider determines which type is enabled on the radio.
Statuses can be sent either to a selected talkgroup or to a private number programmed by your service
provider. Targeted statuses can be sent to any talkgroup defined for the radio or to any private number
that is from the contact list or entered manually.
4.3.9.1
Viewing a Status Message Number
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Press the Menu key and select View.
4.3.9.2
Sending Status Messages
You can send status messages to either a selected talkgroup or a programmed private number. Only
one option can be enabled at a time.
Prerequisites:
• If sending statuses to talkgroups is enabled, switch to the talkgroup to which you want to send a
status message.
• If sending statuses to private numbers is enabled, no action is needed. The private number is set up
by your service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Send Status.
3 Send status messages by performing one of the following options:
68015000180-MR
Chapter 4 :
Main Menu
78

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz