Motorola TETRA MTM5400 User Manual

Icon Talkgroups in Common Folders Talkgroups in Favorite Folders
Multiple networks are available.
In TMO Mode
Display when the TMO normal talkgroup selected is not assigned to the current
network.
Single network is available.
DMO Talkgroup Icons
Display when a DMO talkgroup is selected.
General Icons
Display when the radio is registered to a network that is not the home network.
NOTE: The icon, also known as Migration icon, is only displayed on the top
of the display as a status icon.
Display when the radio is locked to a current network selection that is a single network
while the current selected ISI talkgroup or Any Net talkgroup allows multiple networks.
NOTE: In common folders, no TMO talkgroups are shown when in DMO mode.
2.11
Entering TMO or DMO Mode
Procedure:
1 From the home screen, press Options.
2 Select Trunked Mode/Direct Mode.
2.12
Using Timed Talkgroup Change
This feature allows you to switch a selected talkgroup between the currently selected talkgroup and
a predefined talkgroup (TMO or DMO), making the predefined talkgroup the selected talk group for
a predefined time by using a One-Touch button. After the timer expires, your radio returns to the
previously selected talkgroup.
Prerequisites:
Timed Talkgroup Change is assigned to a One-Touch button.
Procedure:
1 Press and hold the One-Touch button.
2 Your radio switches the selected talkgroup to the predefined talkgroup for a predefined amount
of time.
During the predefined time the radio initiates or joins group communication (SDS, status SDS, or
call) on the predefined talkgroup as the selected talkgroup.
Your service provider can assign a function to the second press of the One-Touch button to:
• Return to previously selected talkgroup
• Restart the predefined time
68015000180-MR
Chapter 2 :
Getting Started
40

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz