Motorola TETRA MTM5400 User Manual

Option Actions
Removing the message protection Select Unprotect.
NOTE: Message protection is en-
abled in the inbox and Call Out
inbox. You can only delete unpro-
tected messages.
4.3.2.4
Embedded Number
The Embedded Number feature allows you to call a number embedded in the message in the Inbox or
Outbox folder. You can also start a group call with the message sender of a talkgroup.
4.3.2.5
Storing Numbers from Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the number of the sender or embedded number from the
message to a new or existing contact.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages→Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
NOTE: To store a number for a new contact, select [New Contact] and fill out the
required fields. Press Done to save it.
8 Select Edit.
9 Choose the Type of the new number and press Done.
4.3.2.6
Calling Numbers from Messages
The Embedded Number feature is enabled by your service provider. You can return a voice call to the
sender of a message or to any number that is embedded in the message text.
Procedure:
1 From the home screen, press the
Menu key.
2 Select Messages→Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
The radio displays a list of numbers, including the number of the sender.
5 To call, select the required number and do one of the following:
68015000180-MR
Chapter 4 :
Main Menu
73

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz