Motorola TETRA MTM5400 User Manual

4.7.5.2
Volume Adjustment Mode
You can set the volume to Individual or Common. When set to Common, the audio has one setting for
all items.
When set to Individual, the volume level for the following options can be set per user preference.
• Voice
•
Duplex
• Simplex
• Earpiece
• Speaker
• Keypad
The Volume Control Mode is configurable using the Customer Programming Software (CPS).
4.7.5.2.1
Setting Volume Adjustment Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Audio→Volume Adj. Mode.
3 Select one of the following options:
• Individual – You can set Duplex, Simplex, Earpiece, Speaker, and Keypad per your
preferences in Menu→Setup→Set Volume.
• Common – You can set one value for all the items in Menu→Setup→Set Volume.
4.7.6
Tones
This field sets the volume level for the tones set.
NOTE: The radio has two tone packs: Classic Tones (default) and New Tones. Your service
provider decides which tone pack is enabled.
4.7.6.1
Keypad Tone
You can activate/deactivate keypad tone at every key press.
4.7.6.1.1
Setting Keypad Tone
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Tones→Keypad Tone.
3 Select one of the following options:
• On – Activates keypad tone.
• Off
– Deactivate keypad tone.
68015000180-MR
Chapter 4 : Main Menu
95

Motorola TETRA MTM5400 Specifications

General

Operating Temperature	-30°C to +60°C
IP Rating	IP54
Channels	Up to 1000
RF Power Output	10W
Frequency Bands	380-430 MHz, 806-870 MHz