NETGEAR ProSAFE GSS108E User Manual

Getting Started
17
ProSAFE 8-Port and 16-Port Gigabit Click Switch
3. Launch a web browser.
4. In the address field of the browser, enter the IP address of the switch.
You can find the IP address of the switch by using the ProSAFE Plus utility or get it from
the DHCP server. If the switch cannot get an IP address from a DHCP server, enter
192.168.0.239.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information screen displays.
6. Select Maintenance > Change Password.
The Change Password screen displays.
7. In the Old Password field, type the current password for the switch.
8. Type the new password in the New Password field and in the Re-type New Password
field.
9. Click the Apply button.
Your settings are saved. Save the new password in a secure location so that you can
access the switch in the future.

NETGEAR ProSAFE GSS108E Specifications

General

Brand	NETGEAR
Model	ProSAFE GSS108E
Category	Switch
Language	English