Manage the Switch
55
ProSAFE 8-Port and 16-Port Gigabit Click Switch
The switch’s default password is password.
The Switch Information screen automatically displays.
Note: To navigate to this screen, select System > Management > Switch
Information.
Control the Switch LEDs
By default, the switch’s Link Speed and Activity LEDs light when the port is in use. You can
turn off the switch LEDs or you can turn on only the Link Speed LEDs.
Use the ProSafe Utility to Control the Switch LEDs
To control the switch LEDs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home screen displays a list of Plus switches that it discovers on the
local network.
3. Select a switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status screen displays.
To Next Page
Loading...
Need help?
General