- D ・ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
#638×2
#290
#604
#285
#B2008
#B261
#B2008
#607 #293
#291
・
Take out the screw (#607), and remove the AE FPC retainer plate (#293).
・
Remove the FPC of the AE FPC unit (#B2008) from the connector.
・
Take out the screw (#604), and remove the AE sensor plate spring (#285).
・
Take out the screw (#291), and remove the AE FPC unit (#B2008) and AE sensor adjusting spring (#290).
・
Take out the two screws (#638), and remove the eyepiece barrel unit (#B261).
Eyepiece barrel unit
AE FPC unit
3. Front Body
Adhesive: Screw lock