- A ・ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
(3) Shading adjustment
・Click "Start".
・Setting conditions are displayed.
・Attach the tool lens (Aperture F5.6) and ND lter (ND 8× 1) to the camera.
・Get the camera closest to the center of the illuminated surface of the color viewer.
・Click "OK".
・The adjustment starts. When it is completed, "OK" is displayed.
・Click "OK".
・Click "Next".
(4) Gr/Gb compensation adjustment (R/B lter) / Line crawl adjustment
・Click "Start".
・Setting conditions are displayed.
・Attach the tool lens (Aperture F5.6) and SP3 (R lter) to the camera.
・Get the camera closest to the center of the illuminated surface of the color viewer.
・Click "OK".
・The adjustment starts. When it is completed, the next setting conditions are displayed.
・Attach the tool lens (Aperture F5.6) and SP1 (B lter) to the camera.
・Get the camera closest to the center of the illuminated surface of the color viewer.
・Click "OK".
・The adjustment starts. When it is completed, the next setting conditions are displayed.
・Leave the camera with the tool lens (Aperture F5.6) and SP1 (B lter).
・Get the camera closest to the center of the illuminated surface of the color viewer.
・Select "OK".
・The adjustment starts. When it is completed, the next setting conditions are displayed.
・Attach the tool lens (Aperture F5.6) and SP3 (R lter).
・Get the camera closest to the center of the illuminated surface of the color viewer.
・Click "OK".
・The adjustment starts. When it is completed, the next setting conditions are displayed.
・Attach the tool lens (Aperture F5.6) (without lter).
・Get the camera closest to the center of the illuminated surface of the color viewer.
・Click "OK".
・The adjustment starts. When it is completed, "OK" is displayed.
・Click "OK".
・Click "Next".