- A ・ -
logo_Q0650_forGraphic
071004_Gdesign_ito
VBA21001-R.3753.A
7-5. Reading of RISC version
・Click "RISC VERSION" of the menu on screen.
・RISC version is displayed.
7-6. TFT adjustment
・Click "TFT ADJUSTMENT" on the menu.
Writing of TFT xed values
・Click "REWRITING THE TFT FIXED VALUE".
・The message "Will you rewrite the CAMERA?" appears.
・Click "Yes".
・Writing is completed.
・Click "OK".
Flicker adjustment
・Usually default value is set and adjustment is not necessary.
・If icker is recognized by visual check, adjust by the slider so that no icker is visible.
・Remove the USB cable from the camera, then remove the AC adapter without turning the camera OFF.
Hue adjustment
・Usually default value is set and adjustment is not necessary.
・If some problem is found with hue by visual check, adjust and correct it by the slider.
・Remove the USB cable from the camera, then remove the AC adapter without turning the camera OFF.
Brightness adjustment
・Usually default value is set and adjustment is not necessary.
・If some problem is found with brightness by visual check, adjust and correct it by the slider.
・Remove the USB cable from the camera, then remove the AC adapter without turning the camera OFF.