117Service Manual โ SC401, SCRUBTEC 344 24 - Electrical System (Battery)
Troubleshooting
See the other chapters for previously provided instructions for other electrical system components.
Trouble Possible Causes Remedy
The machine is not working The batteries (BAT) ๎at or connections sre
faulty
Charge the batteries or
clean the connections
The batteries (BAT) are broken Check the battery no-load
voltage
The relay (ES1) is broken Replace
The on-board battery charger (CH) is broken Replace
The wiring harness is cut or pressed or short
circuited
Repair
Note: A damage to the on-board battery charger or its connections can prevent the machine from
operating properly.
To Next Page
Loading...
Need help?
General
