Nilfisk-Advance SC401 Series User Manual

141Service Manual – SC401, SCRUBTEC 344 34 - Scrub System, Disc
Brush Motor Cleaning
1. Drive the machine on a level oor or on a hoisting system to facilitate the procedures.
2. If equipped remove the ignition key, then disconnect the red battery connector.
3. Under the machine, check and clean the brush motor (A) by using compressed air nozzle (B) from the
dirt/dust that could compromise its correct function (overheating, overvoltage ect.).
Figure 5:
A
B

Nilfisk-Advance SC401 Series Specifications

General

Brand	Nilfisk-Advance
Model	SC401 Series
Category	Floor Machine
Language	English