109 Using the Copier
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and the
functions that are frequently used when making copies, such as specifying the
zoom ratio and the copy density.
" Before making copies, check that the Copy key is lit up in green. If the key
is not lit up in green, press the Copy key to enter Copy mode.
" The default paper size setting can be changed with TRAY1 PAPER
SETUP in the UTILITY menu. For details, refer to “TRAY1 PAPER
SETUP Menu” on page 45.
If, while specifying settings, no key is pressed for the length of time specified for
AUTO PANEL RESET, the entered settings are canceled and the main screen
(Copy mode) is displayed.
Basic Copy Operation
1 Position the document to be copied.
" For details on positioning the
document, refer to “Placing a
document on the original
glass” on page 98 and
“Loading a document into
the ADF” on page 99.
To Next Page
Loading...
Need help?
General
