114 Using the Copier
" For details on positioning the document on the original glass, refer to
“Placing a document on the original glass” on page 98.
4 To print color copies, press the Start-Color key. To print monochrome copies,
press the Start-Mono key.
Scanning of the document begins.
" In order to perform duplex (double-sided) copying or collated (Sort)
copying with 2in1 copying, specify the necessary settings before per-
forming step 4. For details, refer to “Setting Duplex (Double-Sided)
Copying” on page 118 and “Setting Collated (Sort) Copying” on
page 120.
5 When NEXT PAGE? appears in the message window, place the second doc-
ument page on the original glass, and then press the Enter key.
6 Repeat step 5 until all document pages have been scanned.
If 2in1 is set, printing automatically begins after two document pages (four
document pages if duplex (double-sided) copying was set) have been
scanned.
7 After all document pages have been scanned, press the Start-Color key or
the Start-Mono key to begin printing the remaining pages.
Setting a Copy Function
ID card copying, repeat copying and poster copying can be set.
" If a copy function other than NORMAL COPY has been set, 2in1 copying,
collated (Sort) copying and duplex (double-sided) copying cannot be set.
In addition, the zoom ratio is automatically set (and cannot be changed).
" ID card copying, repeat copying and poster copying can only be per-
formed with the original glass. Position the document pages to be
scanned so that they are aligned in the upper-left corner of the original
glass. Since the image is printed 4 mm from the top and left side, adjust
the position of the document as necessary. For details on positioning the
document on the original glass, refer to “Placing a document on the origi-
nal glass” on page 98.
To Next Page
Loading...
Need help?
General
