255 Installing Accessories
4 Lift the machine and place it on top
of the attachment, making sure that
the positioning pins on the attach-
ment correctly fit into the holes on
the bottom of the machine.
WARNING!
This machine weighs approximately 21 kg (46 lb) when it is fully loaded
with consumables.
5 Open Tray 1 and reattach the dust cover.
Next, install the duplex option.
Installing the Duplex option
" The illustrations in the following installation procedure show the machine
with Tray 2 installed; however, the installation procedure would be the
same if the attachment was installed.
To Next Page
Loading...
Need help?
General
