130 Using the Scanner
Specifying the Data Location
Select whether the computer or USB memory device is the location where scan
data is to be saved. When transmitting via a network, refer to “Specifying the
Destination Address (Scan to E-mail/FTP/SMB)” on page 132.
" If an address has been specified as the destination for the data, SCAN
TO PC and SCAN TO USB MEMORY cannot be selected.
Saving Data on a Computer Connected (Scan to PC)
In order to perform Scan to PC operations, the following requirements must be
met.
z This machine is connected to a computer using a USB cable.
z The TWAIN scanner driver, the printer driver and Scanner Utility (Win-
dows only) are installed on the computer.
z Either the Scanner Utility is activated or the Scanner Utility icon appears
in the Windows notification area.
z The document is positioned at the location specified with Paper Source
(Flatbed (original glass) or ADF) in the Scanner Utility.
" For details on the Scanner Utility, refer to the online help.
Follow the procedure described below to send scan data to a computer con-
nected to this machine.
" The scan settings specified with the Scanner Utility are given priority.
1 In the main screen (Scan mode), press the up or down arrow key to select
SCAN TO, and then press the Enter key.
2 Press the up or down arrow key to select SCAN TO PC, and then press the
Enter key.
" The scan data is saved in the folder specified with the Scanner Utility.
To Next Page
Loading...
Need help?
General
