250 Installing Accessories
Installing Tray 2
Note
Since consumables are installed in the machine, be sure to keep the machine
level when moving it in order to prevent accidental spills.
1 Turn off the machine and discon-
nect the power cord and interface
cables.
2 Remove the dust cover from Tray 1.
Close Tray 1 and the output tray.
3 Prepare the lower feeder unit.
" Be sure to place the lower feeder unit on a level surface.
4 Lift the machine and place it on top
of the lower feeder unit, making
sure that the positioning pins on the
lower feeder unit correctly fit into the
holes on the bottom of the machine.
To Next Page
Loading...
Need help?
General
