Oki MC561 User Manual

44473001TH Rev.1
148 /
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.2 Service Bit Menu
Additional Fax Setting menu
(When setup ServiceBit=ON, the following items will be displayed at Asmin Setup
→
Fax
Setup)
# Item Settings Description ODA OEL JP1
1 Service Bit ON
OFF
If set OFF, some menu items are not
displayed on the panel.
It will be shown when OKIUSER set on
except for JP1, JPOEM1.
OFF OFF OFF
2 Country Code U.S.A.
International
United Kingdom
Ireland
Norway
Sweden
Finland
Denmark
Germany
Hungary
Czech/Slovakia
Poland
Switzerland
Austria
Belgium
Netherlands
France
Portugal
Spain
Italy
Greece
Australia
New Zealand
Singapore
Hong Kong
Latin America
Mexico
China
Russia
Taiwan
Japan
Select the country in which the
PX736MFP is going to be installed.
When the desired country code is
selected by this setting, the PTT
parameters that are
suited to the target country are set.
In this setting, any country code can be
selected regardless of the OKIUSER
setting.
USA Intl Japan
# Item Settings Description ODA OEL JP1
3 Korea
Thailand
Malaysia
Jordan
Argentina
Brazil
South Africa
Belarus
Moldova
Turkey
Ukraine
4 A/R Full Print ON
OFF
It only shows, when ServiceBit = ON. ON ON ON
5 Tone For
Echo (For
Transmission)
Enable
Disable
It only shows, when ServiceBit = ON. Disable Disable Disable
6 Tone For Echo
(For Reception)
Enable
Disable
It only shows, when ServiceBit = ON. Disable Disable Disable
7 Attenuator 0~15 dB Enter Attenuator.
It only shows, when ServiceBit = ON.
Depends on Country Code
8 MF Attenuator 0~15 dB Enter MF (Tone) Attenuator.
It only shows, when ServiceBit = ON.
Sets the make rate of DP (10 pps)
during call.
It only shows, when ServiceBit = ON
and Tone/Pulse setting = PULSE.
Depends on Country Code
9 Pulse Make
Ratio
33%
39%
40%
Depends on Country Code
10 Pulse Dial Type N
10-N
N+1
Depends on Country Code
11 MF(Tone)
Duration
75, 85, 100
mseconds
Enter MF (Tone) Duration.
It only shows, when ServiceBit = ON
and Tone/Pulse setting = TONE.
Depends on Country Code
12 Calling Timer 1~255 second
(s)
Sets the call connection wait time (TO
timer). When the setting value is "0",
the MFP runs at the initial value of
each country. When any value other
than "0" is set, the call connection wait
time (TO timer) can be selected in the
range of 1 to 255 mm.
It only shows, when ServiceBit = ON.
Depends on Country Code

Oki MC561 Specifications

Printing Specifications

Print Speed	Up to 27 ppm color, 31 ppm black & white
Time to First Page	As fast as 8 seconds in color, 7.5 seconds in black & white
Print Resolution	Up to 1200 x 600 dpi

Copying Specifications

Copy Speed	Up to 27 cpm color, 31 cpm black & white
First Copy Out	As fast as 14 seconds in color, 12 seconds in black & white
Copy Resolution	Up to 600 x 600 dpi

Scanning Specifications

Scan Type	Color and black & white flatbed
Scan Resolution	Up to 1200 x 1200 dpi
Scan Speed	Approx. 3 sec./page color, approx 2 sec./page black & white at 300 dpi

Fax Specifications

Fax Modem	33.6 Kbps Super G3
Transmission Speed	3 seconds/page
Fax Resolution	Up to 200 x 400 dpi

System Memory

Standard Imaging RAM	256 MB
Max Imaging RAM	768 MB
SD Card Storage	4 GB standard; 16 GB optional

Paper Handling

Scanner RADF Capacity	Up to 50 letter/legal sheets
Standard Input	350 sheets (250 sheets via Main Tray + 100 sheets via MPT)
Maximum Input	880 sheets (with optional 530-sheet 2nd Paper Tray)

Environmental Specifications

Size	16.8" x 20" x 17.5" (42.7 cm x 50.9 cm x 44.4 cm)
Weight	63 lb. (29 kg)
Power Consumption	Operating Normal 570W; Max 1170W; Idle 100W; Power Save 20W; Deep Sleep <1.5W