44473001TH Rev.1
152 /
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.5 Switch pressing function when power supply is turned on
When power supply of printer is turned on, the functions of usable switches are as follows.
And, the switches below are effective when pressed before LED is lighted in the special start
confirming pattern.
(1) Cover Open and CANCEL switch
Despite of warning/error, always start by online mode (factory support function).
If the function is available, the LED will be in lighting state for 2 seconds
(2
) Cover Open and START key
Completely initialize FLASH(resident) when it is in abnormal state. During the
initializing process, all the LED will be in lighting state. Nothing will be done when
the FLASH is normal.
(3
) Cover Open and START key and CANCEL switch
Initialize EEPROM when it is in abnormal state. Nothing will be done when the
EEPROM is normal.