Omron CS1W-AD081-V1 User Manual

8
Basic Configuration Section 1-2
CJ-series PLCs
Note The above diagram is an installation example for the CJ1W-AD041-V1/081-V1
Analog Input Unit and CJ1W-DA021/041 Analog Output Unit.
Mounting Restrictions
CS-series PLCs The CS1W-MAD44 Analog I/O Unit is a Special I/O Unit of the CS Series.
CS1W-MAD44 Analog I/O Units can be mounted to either CS-series CPU
Racks or CS-series Expansion Racks. These Analog I/O Units cannot be
mounted to C200H Expansion I/O Racks or SYSMAC BUS Slave Racks.
The number of Analog I/O Units that can be mounted to one Rack (i.e., a CPU
Rack or Expansion Rack) depends on the maximum supply current of the
Power Supply Unit and the current consumption of other Units. If a Rack is to
be mounted with Analog Input, Output, or I/O Units only, the following restric-
tions will apply.
SYSMAC
CJ1G-CPU44
PROGRAMMABLE
CONTROLLER
RUN
ERR/ALM
INH
PRPHL
COMM
OPEN
PERIHERAL
PORT
MCPWR
BUSY
AD081
B1 A1
MACH
No.
x10
1
x10
0
RUN
ERC
ERH
ADJ
MODE
12
DA041
B1 A1
MACH
No.
x10
1
x10
0
RUN
ERC
ERH
ADJ
MODE
12
M
M
CPU Unit
Temperature
Pressure
Speed
Flow rate
Voltage
Current
Power
Power factor
Sensor
Sensor
Preamp
Trans-
ducer
Regulator
Servo-
controller
Variable speed
controller
Chart
recorder
(Temperature control)
(Position control)
(Speed control)
Analog Input Unit
Analog Output Unit
Power Supply Unit Rack CS1W-
AD041-V1
CS1W-
AD081-V1
(5 VDC
120 mA)
CS1W-DA041
CS1W-DA08V
(5 VDC
130 mA)
CS1W-
MAD44
(5 VDC
200 mA)
CS1W-DA08C
(5 VDC
130 mA)
CS1W-AD161
(5 VDC
150 mA)
C200HW-PA204
C200HW-PA204S
C200HW-PA204R
C200HW-PA204C
C200HW-PD024
(4.6 A at 5 VDC)
CPU Rack63328
Expansion Rack63329
C200HW-PA209R
(9 A at 5 VDC)
CPU Rack1076510
Expansion Rack1076510
CS1D-PA207R
(7 A at 5 VDC)
CPU Rack85448
Expansion Rack96549
CS1D-PD024
(4.3 A at 5 VDC)
CPU Rack63227
Expansion Rack63228

Omron CS1W-AD081-V1 Specifications

General

Brand	Omron
Model	CS1W-AD081-V1
Category	I/O Systems
Language	English