Omron NS - SETUP User Manual

6-1 Operating Modes and System Menu
6-6
5. Comm Tab
Item Function Page
Comms. Auto-return Selects whether automatic recovery is used when a communica-
tions error occurs.
P. 6-39
Timeout interval Sets and displays the timeout monitor time. P. 6-39
Retry Counts Sets and displays the number of communications retries. P. 6-39
Serial Port A Sets and displays whether serial port A is used, the communica-
tions method, and other details.
P. 6-40
Serial Port B Sets and displays whether serial port B is used, the communica-
tions method, and other details.
P. 6-40
Expansion Interface Sets and displays the connector used by serial port B (NS5 only). P. 6-40
Ethernet Sets and displays whether Ethernet is used and communications
details.
P. 6-42
Controller Link Sets and displays whether Controller Link is used and communi-
cations details.
P. 6-45
6. Data Check Tab
Item Function Page
Screen Number Sets the screen number that is displayed as a sample. P. 6-48
Show Address Displays the communications addresses set for the sample dis-
play.
P. 6-48
7. Special Screen Tab
Item Function Page
Alarm History Displays the alarm history screen. P. 6-50
Operation Log Displays the screen for recording the operation log. P. 6-51
Error Log Displays the screen for recording the error log. P. 6-52
Special Functions Displays the device monitor screen and communications test
screen. This function also starts external applications, lists USB
devices, performs Video Configuration, displays capture data or
PLC data trace data.
P. 6-53
to
P. 6-64
System Version Displays the version display screen. P. 6-64
8. Hardware Check Tab
Item Function Page
LCD Check Checks the LCD. P. 6-66
Touch Switch Check Checks the touch switches. P. 6-67
Touch panel Calibration
(NS15 Only)
Calibrates the touch positions. P. 6-67

Omron NS - SETUP Specifications

General

Brand	Omron
Model	NS - SETUP
Category	Touch terminals
Language	English