Appendix 9 List of Optional Products
A-62
A-9-5 Recommended Memory Cards
The Memory Card is an external memory that can save and read screen data, log data,
and system programs between the PT and computer. By using the HMC-AP001, this data
can be exchanged with computers that are connected to PC Cards.
The memory capacity depends on the model of the Memory Card used.
Model Capacity
HMC-EF183 128 Mbytes
HMC-EF283 256 Mbytes
HMC-EF583 512 Mbytes
Note Use a Memory Card recommended by OMRON. Incorrect operation may occur if a non-
recommended memory card is used.
A-9-6 NS-CLK21 Controller Link Interface Unit
This Expansion Unit enables Controller Link communications with PLCs and FA
computers.
Applicable PTs: NS15-TX0@, NS12-TS0@ or NS10-TV0@
Inapplicable PTs: NS8-TV@@ or NS5-SQ@@/TQ@@/MQ@@
A-9-7 NS-CA001/CA002 Video Input Unit
This Expansion Unit enables displaying video images from video cameras or Vision Sen-
sors on the PT.
An external analog RGB image can be input with the NS-CA002 and displayed on the PT.
Refer to the NS Series RGB/Video Input Unit Operation Manual (Cat. No. V086) for details
on the NS-CA002.
Applicable PTs: NS15-TX0@ (The NS15-TX0@ does not support the NS-CA001, and it
does not support video input from the NS-CA002, but it supports analog RGB input from
the NS-CA002.), NS12-TS0@, NS10-TV0@ or NS8-TV@@
Inapplicable PTs: NS5-SQ@@/TQ@@/MQ@@
A-9-8 Attachments: NS12-ATT01(B)/NS12-ATT02/NS8-ATT01/
NS8-ATT02
NS-series PTs and NT-series PTs are different sizes and have different panel cutout di-
mensions. To replace an NT-series PT with an NS-series PT, install an attachment to the
control panel in which the NT-series PT was mounted before mounting the NS-series PT.
Model Specifications
NS12-ATT01 NT625C/631/631C Series to NS12/10 Series
NS12-ATT01B
NT625C/631/631C Series to NS12/10 Series (black)
NS12-ATT02 NT610C Series to NS12/10 Series
NS8-ATT01 NT620S/620C/600S Series to NS8 Series
NS8-ATT02 NT600M/600G/610G/612G Series to NS8 Series
To Next Page
Loading...
Need help?
General
