Omron NS - SETUP User Manual

6-2 Initializing and Saving Data and Removing the Memory Card
6-19
6-2-7 Removing the Memory Card
The Memory Card can be removed from the PT while the PT is ON. Use the following proce-
dure from the Initialize Tab Page of the System Menu to remove the Memory Card.
1. Press the Remove Button next to Memory Card.
2. The following dialog box will be displayed when it is safe to remove the Memory Card.
Press the OK Button.
3. Confirm that it is safe to remove the Memory Card, and remove it from the PT.
Precautions
for Safe Use
When the Memory Card is removed, reinsert the Memory Card into the PT to
use it again. Once a Memory Card is removed, it must be reinserted before the
PT can access it.
Reference The Memory Card in the PT can be removed if the system memory bit $SB50 turns ON
(indicating that the Memory Card is ready to be removed) when the Host turns ON sys-
tem memory bit $SB49. Refer to 2-4 System Memory in the NS Series Programming
Manual for details.

Omron NS - SETUP Specifications

General

Brand	Omron
Model	NS - SETUP
Category	Touch terminals
Language	English