Omron NX-EIC202 User Manual

1 - 9
1 EtherNet/IP Networks
NX-series EtherNet/IP Coupler Unit User’s Manual (W536)
1-2 EtherNet/IP Network Config-
uration Elements
1
1-2-3 Support Software Used to Construct a Network
 Upload and Download
NX Unit configuration information, I/O allocation information, Unit operation settings, and Unit appli-
cation data are transferred to and from the EtherNet/IP Coupler Unit.
 Unit Operation Settings
Make the Unit operation settings for the EtherNet/IP Coupler Unit and NX Units.
 Creating the I/O Mapping
You must create the I/O mappings of the EtherNet/IP Coupler Unit and NX Units.
 Troubleshooting
You can read current error information, clear current errors, read event logs, clear all memory,
restart Units, and use other functions to troubleshoot EtherNet/IP Coupler Units and NX Units.
Precautions for Correct Use
• In addition to the Standard Edition, the Sysmac Studio is also available in an NX-IO Edition.
The Standard Edition provides all of the functionality of the Sysmac Studio. The NX-IO Edi-
tion provides only the functionality required to set up EtherNet/IP Slave Terminals.
• The NX-IO Configurator does not support setting up the NX-series safety control system. To
set up the NX-series safety control system, the Sysmac Studio Standard Edition or NX-IO
Edition is required even if the configuration connects to a CS/CJ/CP-series CPU Unit, Sys-
mac Gateway, or PLC from another company.
Additional Information
When you use an NX-series IO-Link Master Unit to connect IO-Link devices, use CX-Configu-
ratorFDT to set the IO-Link devices. For details on CX-ConfiguratorFDT, refer to the IO-Link
System User's Manual (Cat No. W570) or NX-series IO-Link Master Unit User's Manual (Cat
No. W567).

Omron NX-EIC202 Specifications

General

Brand	Omron
Model	NX-EIC202
Category	Controller
Language	English