Omron NX1P User Manual

43
3-4-3 Rules
You Can
With the NX1P, you can program a ladder diagram that cannot be programmed with the CJ2 or
other traditional PLC.
 You can insert an output without inserting an input. (Always ON Flag is not required)
Functions and function blocks can also be inserted without inserting an input.
 You can connect outputs, functions, and function blocks in series.
You Cannot
 You cannot set a rung without any circuit parts.
 You cannot set a rung with only one input.
 You cannot connect any item other than output after an output.

Omron NX1P Specifications

General

Brand	Omron
Model	NX1P
Category	Controller
Language	English