Omron NX1P User Manual

8
Related Manuals
The followings are the manuals related to this manual. Use these manuals for reference.
Manual name Cat. No. Model Application Description
NX-series
NX1P2 CPU Unit
Hardware User's
Manual
W578 NX1P2- □□□□ Learning the basic
specifications of the
NX1P2 CPU Units,
including introductory
information,
designing, installation,
and maintenance.
Mainly hardware
information is
provided.
An introduction to the entire NX1P2
system is provided along with the
following information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU Unit
Built-in I/O and
Option Board
User's Manual
W579 NX1P2- □□□□ Learning about the
details of functions
only for an NX-series
NX1P2 CPU Unit and
an introduction of
functions for an
NJ/NX-series CPU
Unit.
Of the functions for an NX1P2 CPU
Unit, the following information is
provided.
• Built-in I/O
• Serial Communications Option Boards
• Analog I/O Option Boards
An introduction of following functions for
an NJ/NX-series CPU Unit is also
provided.
• Motion control functions
• EtherNet/IP communications functions
• EtherCAT communications functions
NJ/NX-series
CPU Unit
Software User’s
Manual
W501 NX701- □□□□
NJ501- □□□□
NJ301- □□□□
NJ101- □□□□
NX1P2- □□□□
Learning how to
program and set up
an NJ/NX-series CPU
Unit.
Mainly software
information is
provided.
The following information on a
Controller built with an NJ/NX-series
CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial setting
• Programming based on IEC 61131-3
language specifications
Use this manual together with the
NX-series NX1P2 CPU Unit Hardware
User's Manual (Cat. No. W578).
NJ/NX-series
Instructions
Reference Manual
W502 NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
NX1P2-□□□□
Learning detailed
specifications on the
basic instructions of
an NJ/NX-series CPU
Unit.
The instructions in the instruction set
(IEC 61131-3 specifications) are
described. When programming, use this
manual together with the NJ-series CPU
Unit Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
NJ/NX-series
CPU Unit
Motion Control
User’s Manual
W507 NX701-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
NX1P2-□□□□
Learning about
motion control
settings and
programming
concepts.
The settings and operation of the CPU
Unit and programming concepts for
motion control are described. Use this
manual together with the NJ-series CPU
Unit Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).

Omron NX1P Specifications

General

Brand	Omron
Model	NX1P
Category	Controller
Language	English