Omron Sysmac NJ-series User Manual

5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-12
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
5-6 SNMP Trap Settings Display
 SNMP Trap
*1 The following ports are used by the system and cannot be set by the user: 25, 53, 68, 110, 2222, 2223, 2224,
9600, and 44818.
Additional Information
Refer to 13-1-1 Overview for details on the SNMP trap.
Setting Description Default
SNMP trap Specify whether to use the SNMP trap (network error detec-
tion). If the SNMP trap service is not used, SNMP traps are not
sent to the SNMP manager.
Do not use.
Port No.
*1
Set the port number to use to connect to the SNMP server. It is
normally not necessary to change this setting.
162

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English