Omron Sysmac NJ-series User Manual

A-3
Appendices
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-2 Use the Sysmac Studio to Set the Tag Data Links (EtherNet/IP Connections)
A
A-2-1 Overview of the Tag Data Links (EtherNet/IP Connections) Settings with the Sysmac Studio
A-2 Use the Sysmac Studio to Set the Tag
Data Links (EtherNet/IP Connections)
You can use the Sysmac Studio to set the settings required for creating tag data links (EtherNet/IP con-
nections)
*1
between NJ/NX-series Controllers.
*1 The tag data links and EtherNet/IP connections enable cyclic tag data exchanges on an EtherNet/IP network
between Controllers or between Controllers and other devices. Here, "EtherNet/IP connection" refers to both
the tag data links and the EtherNet/IP connections.
Version Information
Sysmac Studio version 1.10 or higher is required to use the Tag Data Link (EtherNet/IP Connec-
tion) Settings.
A-2-1 Overview of the Tag Data Links (EtherNet/IP Connections)
Settings with the Sysmac Studio

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English