Omron Sysmac NJ-series User Manual

A-45
Appendices
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
A-3 EDS File Management
A
A-3-1 Installing EDS Files
The Network Configurator can support new devices if the proper EDS files are installed.
To install the EDS file, use the following procedure.
1 Select EDS File - Install.
The Install EDS File Dialog Box is displayed.
2 Select the EDS file to install and click the Open Button. Next, select the icon file (*.ico). The
EDS file is added to the Hardware List as a new device. If the hardware already exists, the new
Hardware List will overwrite the previous one. If the hardware versions are different, a hardware
device is added to the Hardware List for each version.
The EDS files are required by the Network Configurator to create a network configuration. To create an
EDS file, use the following procedure.
1 Select EDS File - Create.
2 Set the device information. You can obtain the device information from the device on the net-
work if the network is online.
3 The device is added to the Hardware List as a new device, just like when you install an EDS file.
Additional Information
You cannot set device parameters with the Network Configurator’s EDS file creation function.
Obtain a proper EDS file from the manufacturer of the device to make device parameter settings
for the device.
A-3-1 Installing EDS Files
EDS File - Install
A-3-2 Creating EDS Files
EDS File - Create

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English