Omron Sysmac NJ-series User Manual

11 FTP Client
11-2
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
11-1 Using the FTP Client to Transfer Files
You can use the FTP client to transfer files between the FTP client and an FTP server. You can transfer
files in either direction: download data from the FTP server to the FTP client or upload data from the
FTP client to the FTP server.
Version Information
A CPU Unit with unit version 1.08 or later is required to use the FTP client.
All file transfers that use the FTP client are executed with FTP client communications instructions in the
user program. The file transfer settings are all made with the parameters of the FTP client communica-
tions instructions. No settings are required from the Sysmac Studio.
The FTP client communications instructions and their functions are given in the following table. You can
execute up to three FTP client communications instructions at the same time.
Downloaded files are stored on the SD Memory Card. When uploading files, files that are stored on the
SD Memory Card are uploaded to the FTP server. Therefore, to upload or download files, an SD Mem-
ory Card must be inserted in the NJ/NX-series CPU Unit.
11-1-1 Transferring Files
Instruction Function
FTPGetFileList Gets a file list from the FTP server.
FTPGetFile Downloads one or more files from the FTP server.
FTPPutFile Uploads one or more files to the FTP server.
FTPRemoveFile Deletes one or more files on the FTP server.
FTPRemoveDir Deletes a directory on the FTP server.
Built-in EtherNet/IP Port
Ethernet
FTP server
Downloading
Uploading
File
File on SD Memory Card
in CPU Unit
Uploading and downloading files are executed
with FTP client communications instructions.
FTP client

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English