Omron Sysmac NJ-series User Manual

8-47
8 CIP Message Communications
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
8-5 CIP Object Services
8
8-5-1 CIP Objects Sent to the Built-in EtherNet/IP Port
8-5 CIP Object Services
This section shows services that specify the CIP object in the Request Path and access the CIP mes-
sage server function of the NJ/NX-series Controllers.
The following CIP objects can be sent to an EtherNet/IP port.
This object reads the ID information of the CPU Unit and resets the built-in EtherNet/IP port. When
using an NX701 CPU Unit, use the route path to specify the port number (1 or 2) of the built-in Ether-
Net/IP port to access.
Specify the service to execute with the service code.
*1 The value is 01 hex for a CPU Unit with unit version 1.09 or earlier.
Specify 01 hex.
Specify 00 or 01 hex.
8-5-1 CIP Objects Sent to the Built-in EtherNet/IP Port
Object name Function Reference
Identity object • Reads ID information from the CPU Unit.
• Resets the built-in EtherNet/IP port.
page 8-47
TCP/IP interface object • Writes and reads TCP/IP settings. page 8-50
Ethernet link object • Reads Ethernet settings.
• Reads Ethernet status.
page 8-53
Controller object • Gets the Controller status.
• Changes the operating mode of the Controller.
page 8-58
8-5-2 Identity Object (Class ID: 01 Hex)
Service Codes
Service
code
Parameter name Description
Supported services
Classes Instances
01 hex Get_Attribute_All Reads the values of the attributes. Supported. Supported.
0E hex Get_Attribute_Single Reads the value of the specified attribute. Supported. Supported.
05 hex Reset Resets the built-in EtherNet/IP port. This parameter is used to reset
the built-in EtherNet/IP port when you change the IP address or
other parameter settings and want to apply them. Input one of the
following values for the ServiceDat input variable to the CIPSend
instruction to specify the reset method.
00 hex: Resets the built-in EtherNet/IP port.
02 hex
*1
: Clears the saved tag data link settings and resets the
built-in EtherNet/IP port.
Not sup-
ported.
Supported.
Class ID
Instance ID

Omron Sysmac NJ-series Specifications

General

Brand	Omron
Model	Sysmac NJ-series
Category	Computer Hardware
Language	English